Monitor your Raspberry Pi with eZ Server Monitor

Updated the 15 June 2017 - 0 Comments - Command line, Configuation, Installation, Raspberry Pi

ⓘ Cet article peut avoir été partiellement ou totalement traduit à l'aide d'outils automatiques. Nous nous excusons des erreurs que cela pourrait engendrer.

Your Raspberry Pi slows down or heats up? Would you like to know the temperature and the percentage of CPU utilization or the status of the partitions on your SD card? You need a tool that will allow you to see at a glance the health of your card! For this we will show you how to install eZ Server Monitor, a monitoring tool that allows you to see from a web browser through a clear interface in what state your Raspberry Pi is

Prerequisites for using eZ Server Monitor

In order to install this monitoring solution, you must have your Raspberry Pi connected to the networks (via ethernet or wifi). If you have a Raspberry Pi 2 or older and want to go via wifi, you will need a suitable wifi dongle .

If all this is good, you will need to install a web server on your Raspberry Pi. Apache or Nginx, it does not matter, take the one with which you feel more comfortable. For those who do not know how to do, we advise you to use the same as us to stick perfectly to this tutorial, namely Nginx. You will find how to install it on our dedicated tutorial .

Now that your Raspberry pi is ready, we can move on to the installation and configuration of eZ Server Monitor.

Installing eZ Server Monitor

First of all, go to the folder that stores your website. In our case we are under nginx and our websites are stored in/var/www/html

cd /var/www/html/

Now, download the latest version of eZ Server Monitor as a web version. At the time of writing this tutorial, the latest version is 2.5 but you can find the list of all versions at this address: https://ezservermonitor.com/esm-web/downloads

sudo wget --content-disposition http://www.ezservermonitor.com/esm-web/downloads/version/2.5

Once downloaded, unpack the new folder and delete the archive

unzip ezservermonitor-web_v2.5.zip 
sudo rm ezservermonitor-web_v2.5.zip

Once the installation is complete, we can proceed to the configuration of your Raspberry Pi monitoring system. But just before this for easy access from a browser, it is possible to rename the folder name in which eZ Server Monitoring is located

mv eZServerMonitor-2.5/ monitoring/

For the actual configuration of the monitoring, you will find it in the folder conf.

nano monitoring/conf/esm.config.json

In this file, we advise you to replace all false with true. When you see the interface, you can easily understand the different parameters and adjust the configuration according to your needs.

To access your monitoring system, you only have to open a browser, and enter the IP of your Raspberry followed by the name of the folder in which your monitoring is located. By following this tutorial and with a Raspberry Pi that has an IP in 192.168.1.40 it would give: